 Print
VINLY FLOOR CARE RECOMMENDATIONS
New floor preparation
After at least 48 hours, all installations should be completely
stripped with Bravo 1500+ Heavy Duty Stripper, followed by a
thorough rinse to ensure proper sealer and finish adhesion. Failure
to do so could cause peeling and cracking in the sealer or finish
applications.
| |
High
Gloss |
Medium Gloss |
Low
Gloss |
| Stripper |
Bravo 1500+ |
Bravo 1500+ |
Bravo 1500+ |
| Sealer (2 coats) |
Over & Under |
Over & Under |
Over & Under |
| Finish (3-5 coats) |
Show Place
(for
conventional)
Signature
(for UHS program) |
Carefree |
Carefree Matte |
| Spray Buff |
Trailblazer
(conventional) |
Trailblazer
(conventional) |
N/A |
| Cleaner * |
Stride or
GP Forward |
Stride or
GP Forward |
Stride or
GP
Forward |
* Stride Neutral cleaner is recommended if light to medium soil
loads and frequent cleanings are anticipated. GP Forward performs
best if heavier soil loads and or less frequent cleaning is common.
Spray buffing can be used to bring back the original gloss level and
prolongs the recoating process. We do not recommend the use of high
speed floor polishers or propane type powered high revolution
burnisher, as this may cause damage to any spots in the
installation. Should you still use a UHS program we recommended that
you maintain a minimum of 6-8 coats of combined finish and sealer at
all times. When stripping do not use black pads, blue or green
stripping pads are acceptable to use. For recommended pad colours
that correspond to your type of sealer, finish and the number of
coats please call Johnson Wax technical support.
For technical support from Ovation. Call
01457 870987 or email us: technical@ovationflooring.com
|